Metal Earth Toy Models

Description: Authentic Museum Quality Laser Cut Replica Models These amazingly detailed and precision laser cut models come as 4 square Steel Sheets. Once built they present as amazing 3D museum quality models. Easy to follow instructions. Finished size: 185 x 93 x 47mm Recommended for ages 14 years and up. A Little History of the Chinook: The Metal Earth CH-47 Chinook models are amazingly detailed etched models that are fun and satisfying to assemble. Each model is made from a pair of completely flat laser-etched steel sheets. This American tandem rotor, heavy-lift helicopter was first used during the Vietnam War. Powered by two 4,733 horsepower turbo-shaft engines, it has a top speed of 196 mph which made it faster than any other utility and attack helicopter at that time. It remains in production and frontline service, with over 1,200 built to date. No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth CH-47 Chinook Helicopter 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models

Description: Metal Earth Wild West Revolver 3D Metal Model Kit Each Metal Earth model features amazing detail and is laser cut from one or more 4' square steel sheets. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instructions are included in each kit and no glue or solder required! SPECIFICATIONS: Number Of Sheets: 2 Sheets Difficulty: Moderate Assembled Size: 5.91 L x 0.87 W x 2.44 H (15 L x 2.2 W x 6.2 H cm) No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold separately.

Category: Toy Models

Description: Metal Earth Wright Brothers Airplane 3D Metal Model Kit On December 17, 1903, Orville Wright piloted the first powered airplane 20 feet above a wind-swept beach in North Carolina. The flight lasted 12 seconds and covered 120 feet. Each Metal Earth model features amazing detail and is laser cut from one or more 4' square steel sheets. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instructions are included in each kit and no glue or solder required! SPECIFICATIONS: Number Of Sheets: 1 Sheets Difficulty: Moderate Assembled Size: 3.94 L x 2.01 W x 0.83 H (10 L x 5.1 W x 2.1 H cm) No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold separately.

Category: Toy Models

Description: Metal Earth Apollo 11 Astronaut 3D Metal Model Kit On July 20, 1969, Astronauts Neil Armstrong and Edwin (Buzz) Aldrin became the first humans to set foot on the Moon. Their NASA space suits allowed these astronauts to explore the lunar surface for over two hours in temperatures ranging from -183 to 106 degrees Celsius. Armstrong and Aldrin then boarded the lunar module, re-joined fellow astronaut Michael Collins aboard their command module, and returned safely to Earth. Each Metal Earth model features amazing detail and is laser cut from one or more 4' square steel sheets. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instructions are included in each kit and no glue or solder required! SPECIFICATIONS: Number Of Sheets: 2.5 Sheets Difficulty: Challenging Assembled Size: 3 L x 3 W x 5.3 H (7.7 L x 7.7 W x 13.5 H cm) No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold separately.

Category: Toy Models

Description: Metal Earth USS Constitution 3D Metal Model Kit The USS Constitution, affectionately known as 'Old Ironsides', served in both the Barbary Wars and the War of 1812. The ship now resides at the USS Constitution Museum in Boston Harbour. Each Metal Earth model features amazing detail and is laser cut from one or more 4' square steel sheets. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instructions are included in each kit and no glue or solder required! SPECIFICATIONS: Number Of Sheets: 2.5 Sheets Difficulty: Challenging Assembled Size: 6.8 L x 1.7 W x 5.4 H (17.27 L x 4.32 W x 13.72 H cm) No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold separately.

Category: Toy Models

Description: Metal Earth The Mandalorian 3D Metal Model Kit Build your very own Metal Earth® Premium Series model of The Mandalorian! Each Premium Series kit is made from high quality steel sheets and features amazing detail. Easy to follow instructions are included in each kit and no glue or solder required! Simply snip out the pieces and bend the tabs through corresponding connection points. SPECIFICATIONS: Number Of Sheets: 3 Sheets Difficulty: Challenging Assembled Size: 4.72 L x 4.13 W x 7.4 H (11.99 L x 10.49 W x 18.8 H cm) No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold separately.

Category: Toy Models

Description: Metal Earth Golden Hind 3D Metal Model Kit The Golden Hind or Hinde was an English galleon best known for its circumnavigation of the globe between 1577 and 1580, captained by Sir Francis Drake. She was originally known as the Pelican, but was renamed by Drake mid-voyage in 1578, as he prepared to enter the Strait of Magellan, calling it the Golden Hind to compliment his patron, Sir Christopher Hatton, whose armorial crest was a golden 'hind' (a female deer). Hatton was one of the principal sponsors of Drake's world voyage. Each Metal Earth model features amazing detail and is laser cut from one or more 4' square steel sheets. Simply snip out the pieces and bend the tabs through corresponding connection points. Easy to follow instructions are included in each kit and no glue or solder required! SPECIFICATIONS: Number Of Sheets: 2 Sheets Difficulty: Moderate Assembled Size: 4.33 L x 1.38 W x 3.54 H (11 L x 3.5 W x 9 H cm) No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold separately.

Category: Toy Models

Description: Drogon Assembled Size: 8.27 x 7.48 x 1.57 Difficulty: Challenging These amazingly detailed DIY models start as Laser cut photo etched steel sheets and finish as an amazing 3-D models. The Iconx range are larger in scale and more detailed compare to the normal Metal Earth models, these are slightly more challenging and even more rewarding. Making these a great gift or present. Use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points! Parts can be easily removed from the metal sheets using a pair of clippers. Tweezers make an ideal tool for bending or twisting the connection tabs Official HBO Licensed Product© 2019 Home Box Office, Inc. All Rights Reserved. HBO and related trademarks are the property of Home Box Office, Inc. Suitable for ages 14+ No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth Game of Thrones Drogon 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models

Description: The Daleks are one of the most feared races in the universe. Their creator, Davros only has one intention, destroying all life apart from Dalek life. The Doctor has stopped them on several occasions but somehow they keep coming back! Assembled Size:1.25"(W) x 2"(D) x 2.25"(H) No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth Doctor Who Dalek 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models

Description: V-22 OSPREY Is both a vertical takeoff and landing (VTOL) and short takeoff and landing (STOL) aircraft used by the United States Marine Corps, Air Force and Navy. Its tiltrotor design allows the Osprey to takeoff and land like a helicopter, then fly as a fixed-wing, turboprop aircraft. Steel Model Kit No Glue Required Number of sheets:2.5 Sheets Difficulty: Challenging Assembled Size:5.2(L) x 5.2(W) x 3.1(H) No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth V-22 Osprey 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models

Description: The plate armour used for this model is associated with the knights of the European Late Middle Ages. By about 1400 AD, the full harness of plate armour had been developed which allowed heavy cavalry to dominate the battlefield for more than a century. Each model features amazing detail and is laser cut from one or more 4'' square steel sheets. Simply snip out the pieces and bend the tabs through corresponding connection points. Assembled Size: 120mm x 50mm x 25mm Ages 14+ No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth European Armour 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models

Description: The Iron Throne Assembled Size: 2.72 x 4.33 x 2.6 Difficulty: Challenging These amazingly detailed DIY models start as Laser cut photo etched steel sheets and finish as an amazing 3-D models. The Iconx range are larger in scale and more detailed compare to the normal Metal Earth models, these are slightly more challenging and even more rewarding. Making these a great gift or present. Use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points! Parts can be easily removed from the metal sheets using a pair of clippers. Tweezers make an ideal tool for bending or twisting the connection tabs Official HBO Licensed Product© 2019 Home Box Office, Inc. All Rights Reserved. HBO and related trademarks are the property of Home Box Office, Inc. Suitable for ages 14+ No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth Game of Thrones Iron Throne 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models

Description: Metal Earth Ford Trimotor Ford Trimotor was the world's first luxury airliner when it took to the skies in the late 1920s. Nicknamed the 'Tin Goose", it featured an aluminium corrugated sheet-metal body and wings and was powered by three 420-hp Pratt & Whitney Wasp radial engines. Due to its rugged dependability Admiral Byrd chose it for his attempt to be the first person to fly over the South Pole, which he did on November 28, 1929. SPECIFICATIONS: Number Of Sheets: 3 Sheets Difficulty: Moderate Assembled Size: 7.6 L x 5.1 W x 2.1 H (19.31 L x 12.95 W x 5.34 H cm) These amazingly detailed DIY models start as 4-inch square steel sheets and finish as amazing 3-D models with a beautiful shiny finish that reflects the light. Use the easy-to-follow instructions included with the sheet to pop out the pieces, bend the tabs, and connect them at the attachment points! Parts can be easily removed from the metal sheets using a pair of clippers. Tweezers make an ideal tool for bending or twisting the connection tabs No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth Ford Trimotor 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models

Description: Metal Earth The Terminator T-800 Endoskeleton The Cyberdyne Systems Series 800 Terminator, or simply T-800, is a type of Terminator mass-produced by Skynet. The T-800 Terminator was Skynet's first cybernetic organism, with living tissue over a hyperalloy endoskeleton. This made it Skynet's first successful Infiltrator unit, capable of infiltrating the Resistance. SPECIFICATIONS: Number Of Sheets: 3.5 Sheets Difficulty: Expert Assembled Size: 2.68 L x 4.33 W x 7.68 H (6.81 L x 11 W x 19.51 H cm) No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth The Terminator T-800 Endoskeleton 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models

Description: Star Wars Episode 7 First Order Snowspeeder This model features amazingly detailed laser etching and is laser cut from 2 x 4 square metal sheets. Finished size: 34 x 82 x 51mm Suitable for ages 14+ moderate skill level model. Simple to follow instructions included. Being made of shiny metal gives this model a really cool look. This is a highly-detailed 3D model of the Snowspeeder from the brand new Star Wars movie series. Officially licensed by Disney Metal Earth 3D Metal Models are Easy To Assemble, Simply pop out the pieces by hand or with the aid of wire cutters, then bend tabs to connect at the attachment points. No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth Star Wars Episode 7 First Order Snowspeeder 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models

Description: Imperial Star Destroyer 3D Laser Cut Model This model features amazingly detailed laser etching and is laser cut from a 4 square metal sheet. Moderate skill level model Assembled Size: 10.4 x 6.0 x 5.9 cm Simple to follow instructions included Suitable for ages 14+ Being made of shiny metal gives this model a really cool look. This is a highly-detailed 3D model of the Imperial Star Destroyer from the Star Wars movie series. Officially licensed by Lucas Film. Fascinations 3D Metal Models are Easy To Assemble, Simply pop out the pieces by hand or with the aid of wire cutters, then bend tabs to connect at the attachment points. No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth Star Wars Imperial Star Destroyer 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models

Description: Ford 1931 Model A Truck Kit Steel Model Kit No glue required Each model features amazing detail and is laser cut from one or more 4'' square steel sheets. Simply snip out the pieces and bend the tabs through corresponding connection points. Number of sheets:2 Sheets Difficulty: Moderate Assembled Size:3.35(L) x 1.46(W) x 1.57(H) No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth 1931 Ford Model A Truck 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models

Description: 2 Sheet Model Kit Assembly Required - Includes Instructions Difficulty Level: Easy Item: MMS091 Assembled Size: 5.79 x 4.45 x 1.69 These amazingly detailed models start as a 4" (100mm) square steel sheets and finish as amazing 3D models. Use the easy to follow instructions to pop the pieces, bend the tabs, and connect them at the attachment points. Suitable for ages 14+ No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth B-17 Flying Fortress 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models

Description: Metal Earth Dragon Lady Kit The U-2 Dragon Lady® is a high-altitude surveillance aircraft, designed to fly at 70,000 feet and featuring a 103 foot wing span. The U-2® served the United States during the Cold War and at peak altitude, it could not be tracked by radar, nor shot down. Number Of Sheets: 2 Sheets Difficulty: Moderate Assembled Size (cm): 11.93 x 20.06 x 6.09 Please note: this is a model kit that requires assembly to complete. No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth Dragon Lady 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models

Description: Model of a Wild West Stagecoach including coloured parts. No gluing required Assembled Size:5.71L x 1.89W x 2.52H Ages 14+ No tools are required to build any of our Metal Earth Models however assembly may be easier with the following tools: Hobbies Straight and Curved Tweezers (HOB28) This 2 pack of tweezers are ideal for reaching into awkward areas, then picking, holding and placing very small parts and components with great accuracy. Sprue and Plastic Cutter (PPL6703) For helping to remove parts from the metal sprue. Ideal for making small cuts in plastic and metal sprues and other general hobby and craft applications. Metal Earth Solar Powered Spinner Display (TAS082400) A solar powered revolving acrylic platform. No batteries and requires very little light. The 3.5' diameter rotating disc is the perfect size to display Metal Earth laser cut models, gemstones, jewellery and more. Always in motion, the new Solar Spinner display 360 degrees of the 3D laser cut model. Model shown is for illustration only and is sold seperately. Metal Earth Stagecoach 3D Metal Model Kit - shop the best deal online on craftcompare.co.uk

Category: Toy Models